Skip to content Skip to sidebar Skip to footer

Photofunstudio Try Again After the Registartion Is Completed

Photofunstudio - can't install under Windows 10

Photofunstudio - can't install under Windows 10

Okay, tried three versions now, 52 HD, 50 and 40 HD, all downloaded from the support site at http://av.jpn.support.panasonic.com/support/global/cs/info/windows10.html, and not one of them will install. I get the expected message:

to which I respond in the affirmative, and the install continues to:

which makes no sense - "has not been installed, try again after install"??

I don't particularly like it as a piece of software - all those confirmation requests - but it does offload videos and provide some video editing, which I can't do with ACDSee. So I;d really like to get it installed, just for those features.

Anyone else suffering the same problems? Anyone know a way around?

PC Wheeler

Re: Photofunstudio - can't install under Windows 10

Look here http://www.dpreview.com/forums/post/57671743

I've not tried it, but my *impression* is that you must install from the CD which came with the camera. The downloads are updates which will not install unless you've already done the program install from the supplied disk

But I could be mistaken.

Later: Apparently I was mistaken -- no disk in my ZS100 box!

Ah, but there is a disk in my FZ1000 box, so I will try installing that in Windows 10 and let you know what happens.

Canon PowerShot ELPH 330 HS Sony RX10 IV Panasonic ZS100

selected answer This post was selected as the answer by the original poster.

jonbev

jonbev • Veteran Member • Posts: 3,899

Re: Photofunstudio - can't install under Windows 10

Cannot help, but not surprised that you are having problems, Windows 10 is the most over rated OS ever invented.

Panasonic Lumix DMC-ZS7 Panasonic Lumix DMC-G10

PC Wheeler

Re: Photofunstudio - can't install under Windows 10

John Beavin wrote:

Cannot help, but not surprised that you are having problems, Windows 10 is the most over rated OS ever invented.

Works flawlessly for me on five computers, and two are Macs.

Canon PowerShot ELPH 330 HS Sony RX10 IV Panasonic ZS100

PC Wheeler

Re: Photofunstudio - can't install under Windows 10

Spiggy Topes wrote:

Okay, tried three versions now, 52 HD, 50 and 40 HD, all downloaded from the support site at http://av.jpn.support.panasonic.com/support/global/cs/info/windows10.html, and not one of them will install. I get the expected message:

to which I respond in the affirmative, and the install continues to:

which makes no sense - "has not been installed, try again after install"??

I don't particularly like it as a piece of software - all those confirmation requests - but it does offload videos and provide some video editing, which I can't do with ACDSee. So I;d really like to get it installed, just for those features.

Anyone else suffering the same problems? Anyone know a way around?

Version 5.0 is very old. Current version is 9.5 which I've installed from the CD or DVD in my FZ1000 box. Installed and ran just fine under Windows 10.

What camera do you have? Did it come with a disk in the box?

Canon PowerShot ELPH 330 HS Sony RX10 IV Panasonic ZS100

PC Wheeler

Re: Photofunstudio - can't install under Windows 10

Spiggy Topes wrote:

Okay, tried three versions now, 52 HD, 50 and 40 HD, all downloaded from the support site at http://av.jpn.support.panasonic.com/support/global/cs/info/windows10.html

I've poked around a bit more. Go here to download the latest version:

http://panasonic.jp/support/global/cs/soft/download/d_pfs98pe.html

It will ask for your model and serial number, it appears.

If your camera is not supported, look for the correct link in your user manual (this is from the ZS100 Basic Manual)

Canon PowerShot ELPH 330 HS Sony RX10 IV Panasonic ZS100

edhume

edhume • Contributing Member • Posts: 816

Re: Photofunstudio - can't install under Windows 10

Spiggy Topes wrote:

Anyone know a way around?

As for extracting files, get a card reader. They are small thing that plug in a USB port. Cheap, too. Just take your card out of your camera and insert it in the reader. Windows has a "wizard" that allows you to select what will be done with the card. Select Import Pictures and follow the prompts. I do this for both of my cameras. A movie file is just another file for the wizard.

Panasonic Lumix DMC-LX7 Panasonic Lumix DMC-LF1 Silkypix Developer Studio Pro Corel Aftershot Pro +8 more

Re: Photofunstudio - can't install under Windows 10

Got it figured, thanks to all who responded. The camera is a G5, which came with PFS 8.5PE, but as I couldn't find the disk - bad case of over-the-years disky build-up - I thought I'd just download a fresh copy. The versions listed on the support page only provide downloads to version 5, but do claim it's Win 10 compatible, so I went with that.

I've bitten the bullet and done the search for the install CD and have just installed the version that came with the camera, so hopefully all will now be well.

As to just using a card reader to extract content, video is an issue. As I understand it, the full structure for .MTS video files is spread across multiple directories, and PFS will take over bringing all components into a single folder, which is easier than bringing all the parts together by hand.

Thanks all, your assistance is very much appreciated.

Re: Photofunstudio - can't install under Windows 10

I am having the same problem with PhotofunStudio and Windows 10.  I don't really want to use it at all but I have a camera card that suddenly will only download using wifi ie it is unreadable directly or with a card reader.  I got as far as getting the camera to find the user and folder i wanted to and but when i tried to down load, I got a message that the connection had failed.

edhume

edhume • Contributing Member • Posts: 816

Re: Photofunstudio - can't install under Windows 10

Spiggy Topes wrote:

Got it figured, thanks to all who responded. The camera is a G5, which came with PFS 8.5PE, but as I couldn't find the disk - bad case of over-the-years disky build-up - I thought I'd just download a fresh copy. The versions listed on the support page only provide downloads to version 5, but do claim it's Win 10 compatible, so I went with that.

I've bitten the bullet and done the search for the install CD and have just installed the version that came with the camera, so hopefully all will now be well.

As to just using a card reader to extract content, video is an issue. As I understand it, the full structure for .MTS video files is spread across multiple directories, and PFS will take over bringing all components into a single folder, which is easier than bringing all the parts together by hand.

Thanks all, your assistance is very much appreciated.

I think your understanding of video is incorrect. I download video from cameras very easily, using a USB3 card reader. You do have to exercise care that you don't end up with a USB2 card reader. But aside from that, it's easy as pie. (Pi is something else again.)

Panasonic Lumix DMC-LX7 Panasonic Lumix DMC-LF1 Silkypix Developer Studio Pro Corel Aftershot Pro +8 more

Cpljacko • Contributing Member • Posts: 560

Re: Photofunstudio - can't install under Windows 10

I've had no problem with installing PFS on Win 10, but if it is any help in general - some older software needs to be run on Win10  "As Administrator" and in compatability mode (both settings reached by right click/Properties/Compatability). Significantly you may need to carry out this procedure on the actual install programme before installing.

Panasonic Lumix DMC-LF1 Panasonic LX100 II Panasonic LX10 Panasonic Lumix DC-FZ1000 II

Re: Photofunstudio - can't install under Windows 10

All good information, but my problem is a little different.  When I hook up the Panasonic Lumix FZ70 to the computer via USB, it will not download video files.  I have to remove the camera card and download from that.  But the video files on the card will NOT delete.  So I need to buy new cards every now and again.

Usually I use Picasa 3; but I tried to use the Lumix PhotoFun Studio, hoping that perhaps it would delete video after download.  It crashes, so no good there.

I tried downloading the appropriate software, based on what came with the camera; it says I already have that software.  I tried to download updates, no luck.

All advice gratefully received.

Thanks, RD

windmillgolfer

Re: Photofunstudio - can't install under Windows 10

I've been using PFS for several years, now on version 9.9. I use it to transfer from 5 different Panasonic cameras (into their own sub-folders) and always do so by putting the card in a card reader. This is by choice because it is so much quicker, usually 50 or more shots, after a long tripod maybe 5,000. When travelling, I'll transfer a few by wifi to my iPad.

PFS has settings shown at top right hand side of the PFS window (v9.9 has 2 drop down boxes with icons of a screen and cine-camera, plus one fixed box showing the results of your selection from the two drop down lists), that dictate whether it displays/shows still or video or both. Make sure you set it to show both - so the fixed box should have both the screen and cine-camera icons showing.

I only ever delete the contents of a card when the transferred images/videos have been processed and backed-up to another drive. Deletion is best achieved by reformatting the card in the camera, when, you can be sure, all stills and videos will be wiped.

Note, if transferring to the same folder structure, subsequent transfers will only transfer new stills/videos.  Those already copied will not be copied again.  This will be reflected in the summary information at the end of the transfer e.g. 34 of 54 copied, 20 ignored.

Panasonic Lumix DMC-ZS40 (TZ60) Panasonic Lumix DMC-LX7 Panasonic G85 Panasonic Lumix DMC-GF7 Panasonic Lumix DMC-GM1 +13 more

Re: Photofunstudio - can't install under Windows 10

PC Wheeler wrote:

Look here http://www.dpreview.com/forums/post/57671743

I've not tried it, but my *impression* is that you must install from the CD which came with the camera. The downloads are updates which will not install unless you've already done the program install from the supplied disk

But I could be mistaken.

Later: Apparently I was mistaken -- no disk in my ZS100 box!

Ah, but there is a disk in my FZ1000 box, so I will try installing that in Windows 10 and let you know what happens.

I have a new XPS that only has windows 10, no choice.  I think I got a down load on it.  Some managed it.  I think from on line maybe with Dell's help, athough I have my original CDs.   It downloaded, but the best I get is connect removable disc E or optical disc F options to connect.  Don't think I have them.  I will be calling dell to see what they say.

I also tried to install my discs on my husband computer, which may have never been done before (windows 7).  The update at Panasonic puts me into the same patter as my windows 10.

My old computer is full, and has the program.  I need to down load my camera which has 64 gig chips enough then maybe I can download there.  I just buy the chips, since I can't download for several years now.  My Panasonic TV still works and plays them.   You know we are suppose to keep 3 copies of anything good.  I have many things on zips that won't open from years ago.  I tried buying a new zip...still nothing opened.

If anyone knows how to use that updated program for the DMC-G5  let me know.

windmillgolfer

Re: Photofunstudio - can't install under Windows 10

Why not buy a USB3 card reader. Then transfer your DCIM folders on each card into a folder on your PC using Explorer?

Panasonic Lumix DMC-ZS40 (TZ60) Panasonic Lumix DMC-LX7 Panasonic G85 Panasonic Lumix DMC-GF7 Panasonic Lumix DMC-GM1 +13 more

Keyboard shortcuts:

F Forum M My threads

evansinces1988.blogspot.com

Source: https://www.dpreview.com/forums/thread/4011060

Post a Comment for "Photofunstudio Try Again After the Registartion Is Completed"